Nvidia Jetson TX1 as Access Point and a guide to configure ROS-OpenCV for Jetsons

Nvidia_JetsonTX1_module

Making the final preparations for the participation of MyzharBot-v4 at the next conference GTC 2016 by Nvidia (San Jose, California, APRIL 4-7, 2016), I realized that it would be very helpful to have two guides for the realization of two basic operations for using the Nvidia Jetson TX1 on a…

Continue reading

[Tutorial] Stereolabs ZED on Nvidia Jetson TK1: the official getting started guide

MyzharBot. Photo by Settorezero

On MyzharBot v4 the Asus Xtion Pro Live RGB-D sensor has been replaced by the Stereolabs ZED stereo camera, in order to overcome the limitations of the Primesense technology in outdoor environment under the direct sunlight. The installation of the ZED camera on the Nvidia Jetson TK1 is really straigthforward as…

Continue reading

The guide to configure Nvidia Jetson TK1 has been update

Side view of the NVidia Jetson TK1

The guide to configure the Nvidia Jetson TK1 to get the best performance for MyzharBot and other robotic systems has been updated with the latest tweaks from Jetsonhack Blog. There is also a new tutorial on how to activate the Wifi Access Point. Now you can connect directly to MyzharBot without needing…

Continue reading

Asus Xtion Pro added to ROS on NVidia Jetson TK1

Asus Xtion Pro Live running under ROS

The guide to install OpenNI2 library on NVidia Jetson TK1 has been updated with the instruction to add the RGB-D sensor Asus Xtion Pro Live to the ROS framework. You can find the full guide in the software section. The next step will see the generation of the RGB Point…

Continue reading