Added a new photo gallery about the new chassis of MyzharBot v3.1 ready to be fully assembled.
I published on YouTube two new videos about the unboxing of the chassis of MyzharBot v3.1 and about the first test of assembling to verify if alla the measures were correct. Everything is fine!!! You can find the video in the Videos page
Yesterday evening I received the pack from Vectorealism with the new lasercut pieces of the chassis for MyzharBot v3.1. As test I chose wood as material, but it is perfect and I am ready to realize the plastic chassis. Following a few raw photos of the materials A video with the…
I added the Mechanics section. It contains a full and detailed description of the mechanics and of the chassis of MyzharBot.
After a lot of searching on the web I realized that using 2.5″ M3 tapped spacers to keep the basis of the tracks separated at the right distance is not as easy as it seemed. Spacers long 2.5″ are not easy to be found and what I found is not…
Added a new page about the making of the chassis of the robot. It will contain each file needed to send to a laser cutting service to realize a solid chassis made of plastic or wood.
A new photo gallery is available. It illustrates the phasis of the simple procedure of assembling of the encoder on the rear shaft of the motor.
Added a new page with the image gallery of the rendering results while studying the new chassis for MyzharBot v3